Home » Category » Tents & Shelters » Single-Skin Shelters » X1 Strike SL
X1 Strike SL
Buy Now
£799 / €935

New for 2021, the X1 Strike SL is a superlight version of our standard X1 Strike. The SL models represent our new signature “expedition” range – available only in gold with a big logo printed on the side. The SL uses a lighter fabrics on both the canopy - 20 denier nylon face fabric that is laminated with our X-tex membrane – and the floor – 30 d nylon. We only recommend the SL if weight is of absolute importance – for a saving of 400 g, you get a tent that will only last half as long as the standard version.

Features 
Central roof vent
Mesh panel in door
Third internal pole for extra headroom
Two internal pockets
Diagonal poles inserted through external pole sleeves
Eight guy points
Supplied with 4 x 2 mm Dyneema guylines with mini-Linelok adjusters, 2 m length
Supplied with 6 x alloy pegs, 4 x titanium pegs

Colours

Gold

Technical Specifications

People 2
Total weight 1550 g (complete)
Tent body 885 g
Poles 485 g
Bags, pegs, guys 180 g
Flysheet Waterproof and breathable X-tex
68 g/m², 20 denier, nylon ripstop
20,000 mm hydrostatic head PU/activated carbon
25,000 g/m²/24hr MVTR
Groundsheet 50 g/m², 30 denier, ripstop nylon
10,000 mm hydrostatic head TPU coating
Poles 3 x 8.50 mm Ø DAC Featherlite NSL
Guylines 4 x 2.00 mm Dyneema with mini-Linelok adjusters, 2 m length
Pegs 6 x DAC alloy V-pegs, 12 g each
4 x titanium pegs, 7 g each
Packed size 45 cm x 15 cm Ø
Made In China

 

Dimensions

Inner length 210 cm
Inner width 120 cm
Inner height 100 cm

Buy Accessories

The following accessories are available for the X1 Strike SL:
X1 footprint
Replacement poles
Dyneema guys
Alloy pegs

Care & Maintenance

Storage
Always ensure your tent is completely dry after a trip before packing it away for any length of time. Tents can get stains and mildew if stored in a damp condition – and once these occur, they are almost impossible to remove.

Cleaning
The best way to clean your X1 Strike SL is simply to pitch the tent and wipe down with a cloth using a warm water and detergent mix. Never machine wash.

Groundsheet cleaning
Wipe down with a cloth using a warm water and detergent mix. Never machine wash – this will cause the PU coating to delaminate.

Poles
Over time, the elastic cord inside the poles may lose its stretch. In this case, unscrew the pole foot at one end, untie the elastic and pull it through until there is sufficient tension. Retie it to the pole foot, cut off the excess elastic and screw the pole foot back in. Don't let go of the elastic or you will find yourself re-threading all the sections!