The X3 Bunker is the latest addition to the crux range and our biggest tent. Like the smaller X2s, the main inner tent has an asymmetric geodesic design, but - unusually - is configured around five poles. The benefit of the fifth pole is to help create more vertical walls for greater space, a stronger roofline for improved snow-loading, and smaller wall panels for better inner-fly separation.
Like all crux tents, the X3 Bunker is made from the strongest fabrics available to ensure not only full weather protection, but long-term durability as well.
The X3 Bunker has two porches. The main front porch has two doors, one on each side. The rear porch has a single door. The X3 offers a perfect balance of space, strength and low weight.
|Total weight||3.70 kg (complete)|
72 g/m2, 50 denier, high-tenacity nylon 6.6 ripstop
|Groundsheet||92 g/m², 70 denier, ripstop nylon
7,000 mm hydrostatic head, TPU coating
|Inner canopy||35 g/m², 30 denier, ripstop, high-tenacity nylon 6.6|
|Poles||5 x 10.0 mm Ø DAC Featherlite|
|Guylines||6 x 2.00 mm Dyneema with mini-Linelok adjusters|
|Pegs||16 x 7001-T6 square-section alloy pegs, 12 g each|
55 cm x 22 cm Ø
Gold will not be available in 2017.
All our products are shipped with UPS for quick, reliable and secure delivery. As most of our products are quite large and/or of high value, they will require a signature. We cannot deliver to P.O. boxes. All orders are dispatched the next working day after receipt (Monday to Friday). Typical delivery time is 2–3 days.
If you change your mind about your purchase, you can return it unused for an exchange or refund, provided it is within 90 days of receipt of your order and the item is still in its original packaging.
|Inner length||230 cm|
|Inner width||150 cm|
|Inner height||115 cm|
|Porch (front)||130 cm|
|Porch (rear)||50 cm|
The following accessories are available for the X3 Bunker:
Footprint & porch groundsheet combination
Always ensure your tent is completely dry after a trip before packing it away for any length of time. Both flysheets and inners can get stains and mildew if stored in a damp condition – and once these occur, they are almost impossible to remove.
The best way to clean your X3 Bunker is simply to pitch the tent and wipe down with a cloth using a warm water and detergent mix. Never machine wash.
As with the flysheet, wipe down with a cloth using a warm water and detergent mix. Never machine wash – this will cause the PU coating to delaminate.
Over time, the elastic cord inside the poles may lose its stretch. In this case, unscrew the pole foot at one end, untie the elastic and pull it through until there is sufficient tension. Retie it to the pole foot, cut off the excess elastic and screw the pole foot back in. Don't let go of the elastic or you will find yourself re-threading all the sections!
Very occasionally, insufficient tension in the stitching may mean that some water can seep through tent seams. The area around the vent panels is the most susceptible to this, for the reason that sewing three panels together is more difficult that sewing a straight seam joining just two panels.
Any such water seepage can be easily rectified by applying seam-sealant.
Before you ask: we can’t tape the seams of our X2 tents because they are silicon-coated on both sides, and tape just doesn’t stick properly.