X2 Stealth | Crux UK | Clothing | Backpacks | Tents

X2 Stealth

£995 / €1150

New for 2021, the X2 Stealth is effectively a single-wall version of our venerable four-pole geodesic, double-wall X2 Storm. The single-wall design, sitting on the same footprint and using the same poles as the X2 Storm, is 15% wider, has 30% more internal volume, and is 20% lighter.

The Stealth is a completely free-standing design and has an entrance at each end, although the asymmetric shape means the front is larger than the rear. This is a light, spacious and absurdly strong tent.

Features

Two doors – front and rear

Mesh panel in front door

Central roof vent

Two internal pockets

Diagonal poles inserted through external pole sleeves

Four 3-way guy points

Supplied with 4 x 2 mm Dyneema guylines with mini-Linelok adjusters, 2 m length

Supplied with 6 x alloy pegs, 4 x titanium pegs

Colours

Red
Black

Technical Specifications

People	2
Total weight	2890 g (complete)
Tent body	1885 g
Poles	815 g
Bags, pegs, guys	190 g
Flysheet	Waterproof and breathable X-tex 132 g/m², 50 denier, polyester ripstop 20,000 mm hydrostatic head PU/activated carbon 25,000 g/m²/24hr MVTR
Groundsheet	70 g/m², 70 denier, ripstop nylon 10,000 mm hydrostatic head TPU coating
Poles	2 x 9.60 mm Ø DAC Featherlite NSL 2 x 9.00 mm Ø DAC Featherlite NSL
Guylines	4 x 2.00 mm Dyneema with mini-Linelok adjusters, 2 m length
Pegs	6 x 7001-T6 alloy pegs, 12 g each 4 x Titanium pegs, 8 g each
Packed size	45 cm x 20 cm Ø
Made In	China

Dimensions

Inner length	225 cm
Inner width	135 cm
Inner height	107 cm

Buy Accessories

The following accessories are available for the X2 Stealth:
Replacement poles
Dyneema guys
Alloy pegs

Care & Maintenance

Storage
Always ensure your tent is completely dry after a trip before packing it away for any length of time. Tents can get stains and mildew if stored in a damp condition – and once these occur, they are almost impossible to remove.

Cleaning
The best way to clean your X1 Raid is simply to pitch the tent and wipe down with a cloth using a warm water and detergent mix. Never machine wash.

Groundsheet cleaning
Wipe down with a cloth using a warm water and detergent mix. Never machine wash – this will cause the PU coating to delaminate.

Poles
Over time, the elastic cord inside the poles may lose its stretch. In this case, unscrew the pole foot at one end, untie the elastic and pull it through until there is sufficient tension. Retie it to the pole foot, cut off the excess elastic and screw the pole foot back in. Don't let go of the elastic or you will find yourself re-threading all the sections!